Trend LOCK/JIG/C Professional Lock Jig Kit

Description

• Product Code:TRELOCKJIGCPK

• Model Number: LOCK/JIG/C

• Brand: Trend

• Barcode: 5055284497560

• Taxonomy: Hardware > Tool Accessories > Jigs

• Category: Door Hinge & Lock Jigs

If you’re regularly fitting locks, the Trend LOCK/JIG/C Professional Lock Jig from ITS is going to make your life a whole lot easier.

Built tough with solid steel, this professional lock jig is designed to deliver precision and consistency every time you route a lock or faceplate recess. Whether you're on site or in the workshop, it gives you full control, thanks to the long adjustable fence and smooth clamp system.

The jig adapts easily to doors between 34mm and 58mm thick, and those thumb-turn clamps mean setup is quick and frustration-free - no more messing with tools just to get things in place. It comes with 17 templates to cover all the common lock sizes, and the centring insert makes sure you're always spot on when lining up.

Plus, the guide bush collar and height spacers speed things up even more by cutting down on extra measuring and fiddling. If you’re using a ½” router with an 80mm plunge and a 12mm cutter, you’re good to go.

This jig’s all about getting the job done faster, with less hassle, and with results that look professional every time.

When you're working on door installations or cabinetry, achieving clean, square corners in routed recesses is essential for a professional finish. The Trend C/CHISEL Corner Chisel is designed to simplify this task, allowing you to quickly and accurately square off rounded corners left by routers.

This tool features a spring-loaded high-speed steel (HSS) anvil that delivers sharp cuts and ensures long-lasting performance. Its lightweight aluminium body makes it easy to handle, reducing fatigue during extended use. Simply position the chisel in the corner of the recess and strike it with a hammer to achieve a precise 90-degree angle.

When you’re working on a demanding routing job and need a cutter bit you can rely on, the Trend TR37X1/2TC 12mm x 63mm 1/2" Two Flute Cutter from ITS is crafted for precision, durability and performance.

Designed specifically for use with Trend’s Lock Jigs, this router bit features a ½-inch shank and a 12 mm diameter cutting edge with a 63 mm cut length - giving you the reach and stability needed for professional-grade housing, grooving or mortising tasks.

Built to tackle the abrasive challenges of modern materials, the TR37X1/2TC incorporates 2 mm micro-grain tungsten-carbide tips that stay sharp even when working chipboard, MDF, plywood or medium-hard hardwoods.

Faceplate Templates:

25.4 x 60.0mm (Tubular Latch) - 22(A)
24.0 x 57.5mm (Tubular Latch) - 22(B)
26.0 x 56.5mm (Tubular Latch) - 23(A)
26.0 x 57.5mm (Tubular Latch) - 23(B)
22.2 x 128.5mm - 20
22.2 x 155.0mm - 1
22.5 x 152.5mm - 2
25.4 x 121.0mm - 3
26.0 x 134.0mm - 5
25.4 x 153.0mm - 7
25.4 x 165.5mm - 9
25.4 x 177.0mm - 10
26.0 x 139.0mm - 21
26.0 x 162.0mm - 12

Mortise Templates:

19 x 22mm (Tubular Latch) - J(A)
22 x 24mm (Tubular Latch) - J(B)
16 x 72mm - A
16 x 102mm - F
16 x 109mm - B
19 x 78mm - C
19 x 90mm - E
19 x 109mm - D
19 x 115mm - H

Requires: ½”/12mm Plunge Router (80mm plunge depth), ½”/12mm Router Cutter (12mm cut diameter x 63mm cut length), and 30mm Guide Bush.

---

Authorised Trend Stockist

ITS are an authorised stockist of Trend Products, we only sell 100% genuine Power Tools and Accessories, so you can trust us for all the tools you need!