Flex VCE 33 M AC Class Dust Extractor
Key Features
- High performance Turbine
- Continuous automatic flat filter
- Flow sensor technology
- Soft start
- Dust-protected anti static finish
£664.99
EX VAT
-
Free Gift -
Promotion -
Promotion
-
Promotion
-
Promotion
-
Promotion
Categories you might like
Description
- Product Code:FLEVCE33MAC
- Model Number: VCE 33 M AC
- Brand: Flex
FLEX VCE 33 M AC Class M Safety vacuum cleaner with automatic cleaning system suitable for all dusts with OEL values ≥ 0.1 mg/m³. Specifically for mineral and timber dusts (also beech and oak).
Adaptor plate can be installed without using tools, for fixing L-BOXXes and Tanos systainers on the head of the vacuum cleaner.
High-performance turbine ensures both a high suction capacity and a high vacuum. The outcome is an excellent extraction result, continuous automatic flat filter cleaning ensures no loss of suction. The flat-fold filter with Teflon coating/nanocoating allows optimum use of the tank volume.
With permanent socket and electronic automatic on/off switch. Flow sensor technology monitors the flow rate and emits a visual and audible signal to indicate any drop below the statutory minimum value of ≤20m/s.
The flow rate control via the rotary switch minimises possible vacuums on the surface during intermediate and finish sanding, suction diameter selector switch for adjusting the optimum flow rate. Soft start stops any voltage peaks at the start and the run-on feature (15 sec. overrun) empties any remaining dust in the vacuum hose.
Double-walled sturdy container with integrated grip recess for emptying the container easily. Dust-protected antistatic finish prevents electric charging of the suction hose.
Equipped with large wheels and two swivel metal guide rollers. Separate motor air cooling duct with coarse dirt filter protects the turbine against the ingress of ambient air and thereby extends the service life. (Fine dust filter PES available as an accessory).
Simple filter change without removing the suction head. With hose retainer and expander for easy, quick securing of the power cable.
With 4 clamping loops (2 on each side) for attaching straps and a giraffe holder.
Suitable for wet vacuuming with electronic liquid level control.
Authorised Flex Stockist
ITS are an authorised stockist of Flex Products, we only sell 100% genuine Power Tools and Accessories, so you can trust us for all the tools you need!
Specification
| Case | No Case |
| Voltage | 110V / 240V |
| Includes Case | No |
| Air Flow Rate | 1900l/min |
| Tank Capacity | 17 Litre |
| Filter Surface Area | 5000 cm2 |
| Power Supply | Corded |
| Dimensions | 565 x 385 x 565mm |
| Pack Size | 1 |
| Wattage | 1400 |
| Product Weight | 15.2kg |
Warranty Information
FLEX will provide the end consumer of a newly purchased power tool with a 3-year manufacturer’s guarantee commencing on the date the power tool is purchased. You must register the tool with Flex within 30 days of purchase.
The warranty includes all machines plus the cordless charger, 10.8v and 18.0v batteries. The batteries are covered under warranty up to 700 charges.
Key Features
- High performance Turbine
- Continuous automatic flat filter
- Flow sensor technology
- Soft start
- Dust-protected anti static finish
Description
Description
- Product Code:FLEVCE33MAC
- Model Number: VCE 33 M AC
- Brand: Flex
FLEX VCE 33 M AC Class M Safety vacuum cleaner with automatic cleaning system suitable for all dusts with OEL values ≥ 0.1 mg/m³. Specifically for mineral and timber dusts (also beech and oak).
Adaptor plate can be installed without using tools, for fixing L-BOXXes and Tanos systainers on the head of the vacuum cleaner.
High-performance turbine ensures both a high suction capacity and a high vacuum. The outcome is an excellent extraction result, continuous automatic flat filter cleaning ensures no loss of suction. The flat-fold filter with Teflon coating/nanocoating allows optimum use of the tank volume.
With permanent socket and electronic automatic on/off switch. Flow sensor technology monitors the flow rate and emits a visual and audible signal to indicate any drop below the statutory minimum value of ≤20m/s.
The flow rate control via the rotary switch minimises possible vacuums on the surface during intermediate and finish sanding, suction diameter selector switch for adjusting the optimum flow rate. Soft start stops any voltage peaks at the start and the run-on feature (15 sec. overrun) empties any remaining dust in the vacuum hose.
Double-walled sturdy container with integrated grip recess for emptying the container easily. Dust-protected antistatic finish prevents electric charging of the suction hose.
Equipped with large wheels and two swivel metal guide rollers. Separate motor air cooling duct with coarse dirt filter protects the turbine against the ingress of ambient air and thereby extends the service life. (Fine dust filter PES available as an accessory).
Simple filter change without removing the suction head. With hose retainer and expander for easy, quick securing of the power cable.
With 4 clamping loops (2 on each side) for attaching straps and a giraffe holder.
Suitable for wet vacuuming with electronic liquid level control.
Authorised Flex Stockist
ITS are an authorised stockist of Flex Products, we only sell 100% genuine Power Tools and Accessories, so you can trust us for all the tools you need!
Specification
- Case No Case
- Voltage 110V / 240V
- Includes Case No
- Air Flow Rate 1900l/min
- Tank Capacity 17 Litre
- Filter Surface Area 5000 cm2
- Power Supply Corded
- Dimensions 565 x 385 x 565mm
- Pack Size 1
- Wattage 1400
- Product Weight 15.2kg
Warranty Information
Warranty Information
FLEX will provide the end consumer of a newly purchased power tool with a 3-year manufacturer’s guarantee commencing on the date the power tool is purchased. You must register the tool with Flex within 30 days of purchase.
The warranty includes all machines plus the cordless charger, 10.8v and 18.0v batteries. The batteries are covered under warranty up to 700 charges.
Customer Reviews (0)