Trend 900mm Worktop Jig - Pro Multi Material
Key Features
- Modular and collapsible
- Easy set window for measuring from the front edge
- 5 insets cut depths
- Great for square edge worktops
- Recessed clamping points
£149.99
EX VAT
-
Free Gift
-
Promotion
-
Promotion
-
Promotion
-
Promotion
-
Promotion
Categories you might like
Description
- Product Code:TREKWJ900P
- Model Number: KWJ900P
- Brand: Trend
- Barcode: 5027654071083
Front Edge Setting
All settings are done from the front edge eliminating any discrepancies from scribing or when using non standard width worktops.
Easy Set Reference Window
Ability for fast set up for any backset. Simply align to a measured line.
4 Different Jig Options
- 660mm long (500mm maximum joint length) for narrow bathroom vanity tops
- 990mm long (750mm maximum joint length) standard kitchen worktop installations
- 1190mm long (900mm maximum joint length) for wider breakfast bars
- peninsular joints and standalone connector bolt, hinge and tap hole jig
Adaptable Modular Jig
The KWJ900P can be resized allowing access to where there is workspace limitations
Flush Edge Compatability
Allows worktops to be cut flush with door faces for handleless contemporary styles without additional measuring or marking up
Fast Joint cutting
Full male and female joints can be cut in 15 minutes including setup time
Multiple Worktop Compatiblity
Compatible with Compact laminate, Composite, Solid wood and Chipboard Laminate.
No Restrictions on Worktop width
Cuts any sized joints without the need of alignment pins for worktop widths
Easy to setup
Simple intuitive setup. Measure, mark, clamp and cut
OFFSET CAMS
Unique backset wedges for consistent easy setting
Edge profile compatibility
Covers square edge, small radius, Postform radius and bullnose profiles
Specification
Buying Option | 900mm Worktop Jig |
Warranty Information
All Trend products are guaranteed for 12 months (unless guarantee card or product packaging advises otherwise) from the original purchase date against any manufacturing defects leading to premature failure. Trend guarantee to replace all defective parts free of charge or at its discretion to replace the product free of charge.
Trend Professional Power Tools meet the highest quality standards. Trend offers you the opportunity to extend your warranty to three years from date of purchase free of charge. All you have to do is register your tool online within four weeks of purchase.
This offer is available for the following Trend Professional Power Tools only; Product Refs. T5EB, T5ELB, T5EK, T5ELK, T5EK/MK2, T7EK, T10EK, T10ELK, T11EK, T11ELK, T20K, T20LK, T35A and T35AL
Key Features
- Modular and collapsible
- Easy set window for measuring from the front edge
- 5 insets cut depths
- Great for square edge worktops
- Recessed clamping points
Description
Description
- Product Code:TREKWJ900P
- Model Number: KWJ900P
- Brand: Trend
- Barcode: 5027654071083
Front Edge Setting
All settings are done from the front edge eliminating any discrepancies from scribing or when using non standard width worktops.
Easy Set Reference Window
Ability for fast set up for any backset. Simply align to a measured line.
4 Different Jig Options
- 660mm long (500mm maximum joint length) for narrow bathroom vanity tops
- 990mm long (750mm maximum joint length) standard kitchen worktop installations
- 1190mm long (900mm maximum joint length) for wider breakfast bars
- peninsular joints and standalone connector bolt, hinge and tap hole jig
Adaptable Modular Jig
The KWJ900P can be resized allowing access to where there is workspace limitations
Flush Edge Compatability
Allows worktops to be cut flush with door faces for handleless contemporary styles without additional measuring or marking up
Fast Joint cutting
Full male and female joints can be cut in 15 minutes including setup time
Multiple Worktop Compatiblity
Compatible with Compact laminate, Composite, Solid wood and Chipboard Laminate.
No Restrictions on Worktop width
Cuts any sized joints without the need of alignment pins for worktop widths
Easy to setup
Simple intuitive setup. Measure, mark, clamp and cut
OFFSET CAMS
Unique backset wedges for consistent easy setting
Edge profile compatibility
Covers square edge, small radius, Postform radius and bullnose profiles
Specification
- Buying Option 900mm Worktop Jig
Warranty Information
Warranty Information
All Trend products are guaranteed for 12 months (unless guarantee card or product packaging advises otherwise) from the original purchase date against any manufacturing defects leading to premature failure. Trend guarantee to replace all defective parts free of charge or at its discretion to replace the product free of charge.
Trend Professional Power Tools meet the highest quality standards. Trend offers you the opportunity to extend your warranty to three years from date of purchase free of charge. All you have to do is register your tool online within four weeks of purchase.
This offer is available for the following Trend Professional Power Tools only; Product Refs. T5EB, T5ELB, T5EK, T5ELK, T5EK/MK2, T7EK, T10EK, T10ELK, T11EK, T11ELK, T20K, T20LK, T35A and T35AL
Customer Reviews (0)