Flex Giraffe GE5 R Starter Kit with MAC Dust Extractor

Description

• Product Code:FLEGE5RSTARTKIT1
• Model Number: GE 5 R START KIT1
• Brand: Flex

The Flex GE5 R Long Reach Sander Kit Has Arrived!!

The GE5 R is the successer to the WSE500 and has many added features that make it stand out from the rest!

The GE5 R is lighter than ever, what with its total weight of just 3.9kg makes this machine almost a whole kilo lighter. This makes for even better handling and effortless working.

The GE5 R is more versatile than ever thanks to its new close-edge sanding head. You can now not only sand down walls and ceiling, but also edges and wall-ceiling trasitions with the very same tool!

The GE5 R giraffe sander features a VE electronic control system, allowing constant speed control and speed pre-selection with adjusting wheel. The effective dust extraction uses a FLEX clip-on system with a brush ring on the head and a FLEX safety dust extractor connector at the end of the body; The 10-hole extraction ports prevents clogging of the abrasive and promotes a healthy, dust-free working environment. The GE5 R is perfectly balanced thanks to its optimal centre of gravity.This allows relaxed and balanced working.

The large round 225mm cushioned sanding discs attach using velcro and due to the soft backing, spring suspension of the sanding head, the sander sits perfectly to uneven surfaces creating an even finish without excessive pressure points causing grooves or scratching and therefore stops dust escaping. The optimal balance between motor and head help make an easy to control gliding sander, ideally suited for sanding plaster boards, solid styropor insulation slabs, preparation for painting and polishing etc.

Features:
Lighter than ever - 3.9Kg
Optimally balanced - Comfortable handling.
Close edge sanding head - Universal applications
Innovative Bag - Easy Trasportation.
Wide range of uses - Eliminates the need for special machinery.
High efficiency - Incresed service life.

Flex GE5 R - Pleasingly Efficent!

FLEX VCE 35 M AC Class M Safety Vacuum Cleaner is fitted with a high-performance turbine ensuring a higher suction capacity and a high vacuum.

Container capacity can be optimally used for dust and dirt, thanks to the flat-fold filter design but is also suitable for wet vacuuming with an automatic switch on/off and an appliance socket.

Flow sensor technology monitors the volume metric flow and any dropping of the suction capacity under the prescribed minimum is reported by an audible warning signal.

Equipped with large wheels and two swivel guide rollers with additional scope for tool storage on top of vacuum cleaner plus an accessories depot for suction nozzles and tubes at the back.

Class M safety vacuum cleaner suitable for all dusts with OEL values ≥0.1 mg/m. Specifically for mineral and timber dusts (also beech and oak).

Supplied with: 1 x Antistatic Suction Hose with Clip Connection 32mm x 4m, 1 x Flat-Fold Filter PES Class M, 1 x Filter Bag and 1 x PP Waste Disposal Bag.

---

Authorised Flex Stockist

ITS are an authorised stockist of Flex Products, we only sell 100% genuine Power Tools and Accessories, so you can trust us for all the tools you need!