Flex FLEGE5KIT Giraffe GE5 Starter Kit with Dust Extractor

Description

• Product Code:FLEGE5KIT
• Model Number: FLEGE5KIT
• Brand: Flex

Giraffe GE5 Starter Kit with Dust Extractor

GE5 Long Reach Sander is the successer to the WSE500 and has many added features that make it stand out from the rest!

Lghter than ever, what with its total weight of just 3.9kg makes this machine almost a whole kilo lighter. This makes for even better handling and effortless working.

More versatile than ever thanks to its new close-edge sanding head. You can now not only sand down walls and ceiling, but also edges and wall-ceiling trasitions with the very same tool!

Featuring a VE electronic control system, allowing constant speed control and speed pre-selection with adjusting wheel. The effective dust extraction uses a FLEX clip-on system with a brush ring on the head and a FLEX safety dust extractor connector at the end of the body; The 10-hole extraction ports prevents clogging of the abrasive and promotes a healthy, dust-free working environment. The GE5 R is perfectly balanced thanks to its optimal centre of gravity.This allows relaxed and balanced working.

Large round 225mm cushioned sanding discs attach using velcro and due to the soft backing, spring suspension of the sanding head, the sander sits perfectly to uneven surfaces creating an even finish without excessive pressure points causing grooves or scratching and therefore stops dust escaping. The optimal balance between motor and head help make an easy to control gliding sander, ideally suited for sanding plaster boards, solid styropor insulation slabs, preparation for painting and polishing etc.

FLEX VCE 33 M AC Class M Safety vacuum cleaner with automatic cleaning system suitable for all dusts with OEL values ≥ 0.1 mg/m³. Specifically for mineral and timber dusts (also beech and oak).

Adaptor plate can be installed without using tools, for fixing L-BOXXes and Tanos systainers on the head of the vacuum cleaner.

High-performance turbine ensures both a high suction capacity and a high vacuum. The outcome is an excellent extraction result, continuous automatic flat filter cleaning ensures no loss of suction. The flat-fold filter with Teflon coating/nanocoating allows optimum use of the tank volume.

With permanent socket and electronic automatic on/off switch. Flow sensor technology monitors the flow rate and emits a visual and audible signal to indicate any drop below the statutory minimum value of ≤20m/s.

The flow rate control via the rotary switch minimises possible vacuums on the surface during intermediate and finish sanding, suction diameter selector switch for adjusting the optimum flow rate. Soft start stops any voltage peaks at the start and the run-on feature (15 sec. overrun) empties any remaining dust in the vacuum hose.

Double-walled sturdy container with integrated grip recess for emptying the container easily. Dust-protected antistatic finish prevents electric charging of the suction hose.

Equipped with large wheels and two swivel metal guide rollers. Separate motor air cooling duct with coarse dirt filter protects the turbine against the ingress of ambient air and thereby extends the service life. (Fine dust filter PES available as an accessory).

Simple filter change without removing the suction head. With hose retainer and expander for easy, quick securing of the power cable.

With 4 clamping loops (2 on each side) for attaching straps and a giraffe holder.

Suitable for wet vacuuming with electronic liquid level control.

---

Authorised Flex Stockist

ITS are an authorised stockist of Flex Products, we only sell 100% genuine Power Tools and Accessories, so you can trust us for all the tools you need!