£99.99
EX VAT
-
Free Gift
-
Promotion
-
Promotion
-
Promotion
-
Promotion
-
Promotion
Categories you might like
Description
- Product Code:TREARJIG
- Model Number: AR/JIG
- Brand: Trend
- Barcode: 5027654561126
Trend AR/JIG Aperture Radius Jig to rout out apertures, recesses and radii in work tops to fit a range of sinks, hobs and to suit curved cabinets.
Cutx both internal & external radius with the use of either pins or engraved sight lines. Cuts a 90° angle, which when combined with the straight slot will allow a hob or sink aperture to be routed. Central slot allows cuts up to 820mm long.
Radius curves at 40mm, 60mm, 80mm, 100mm, 150mm & 250mm and external radii of 50mm, 100mm & 200mm, also has a 45° end cut, plus 26mm and 35mm cabinet door hinge recess facility.
Engraved lines to position jig to marked position on the worktop.
Each of the six radius curves is paired with a set of peg holes that will set the jig to work top edge. Pins made from ABS plastic for strength.
Jig requires:
A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.
A template guide bush with 30mm outside diameter.
A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.
Two clamps.
Specifications
Corner Angle: 90°
Slot Length: 830mm
Radius Curves: 40mm, 60mm, 80mm, 100mm, 150mm & 250mm
External Radius: 50mm, 100mm & 200mm
End Cut: 45°
Kitchen Hinge Recess: 26mm & 35mm
Length: 1000mm
Thickness: 12mm
Width: 390mm
Weight: 4.6kg
Specification
Pack Size | 1 |
Product Weight | 1.0kg |
Warranty Information
All Trend products are guaranteed for 12 months (unless guarantee card or product packaging advises otherwise) from the original purchase date against any manufacturing defects leading to premature failure. Trend guarantee to replace all defective parts free of charge or at its discretion to replace the product free of charge.
Trend Professional Power Tools meet the highest quality standards. Trend offers you the opportunity to extend your warranty to three years from date of purchase free of charge. All you have to do is register your tool online within four weeks of purchase.
This offer is available for the following Trend Professional Power Tools only; Product Refs. T5EB, T5ELB, T5EK, T5ELK, T5EK/MK2, T7EK, T10EK, T10ELK, T11EK, T11ELK, T20K, T20LK, T35A and T35AL
Description
Description
- Product Code:TREARJIG
- Model Number: AR/JIG
- Brand: Trend
- Barcode: 5027654561126
Trend AR/JIG Aperture Radius Jig to rout out apertures, recesses and radii in work tops to fit a range of sinks, hobs and to suit curved cabinets.
Cutx both internal & external radius with the use of either pins or engraved sight lines. Cuts a 90° angle, which when combined with the straight slot will allow a hob or sink aperture to be routed. Central slot allows cuts up to 820mm long.
Radius curves at 40mm, 60mm, 80mm, 100mm, 150mm & 250mm and external radii of 50mm, 100mm & 200mm, also has a 45° end cut, plus 26mm and 35mm cabinet door hinge recess facility.
Engraved lines to position jig to marked position on the worktop.
Each of the six radius curves is paired with a set of peg holes that will set the jig to work top edge. Pins made from ABS plastic for strength.
Jig requires:
A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.
A template guide bush with 30mm outside diameter.
A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.
Two clamps.
Specifications
Corner Angle: 90°
Slot Length: 830mm
Radius Curves: 40mm, 60mm, 80mm, 100mm, 150mm & 250mm
External Radius: 50mm, 100mm & 200mm
End Cut: 45°
Kitchen Hinge Recess: 26mm & 35mm
Length: 1000mm
Thickness: 12mm
Width: 390mm
Weight: 4.6kg
Specification
- Pack Size 1
- Product Weight 1.0kg
Warranty Information
Warranty Information
All Trend products are guaranteed for 12 months (unless guarantee card or product packaging advises otherwise) from the original purchase date against any manufacturing defects leading to premature failure. Trend guarantee to replace all defective parts free of charge or at its discretion to replace the product free of charge.
Trend Professional Power Tools meet the highest quality standards. Trend offers you the opportunity to extend your warranty to three years from date of purchase free of charge. All you have to do is register your tool online within four weeks of purchase.
This offer is available for the following Trend Professional Power Tools only; Product Refs. T5EB, T5ELB, T5EK, T5ELK, T5EK/MK2, T7EK, T10EK, T10ELK, T11EK, T11ELK, T20K, T20LK, T35A and T35AL
Customer Reviews (0)