Gripit
Grip it fixings are for hanging heavy kit on plasterboard when a normal plug just spins and pulls out.
When you've got radiators, TVs, cabinets, or a mirror going up on dot and dab, you need a fixing that bites and spreads the load, not one that chews the board. Gripit fixings clamp behind the plasterboard so you can get a solid hold without hunting for studs. Pick the right type for your board thickness and the weight you're hanging, then crack on.
What Jobs Are Grip It Fixings Best At?
- Fixing wall cabinets, shelving, and heavy mirrors to plasterboard where you cannot land on timber studs and you still need a confident, load spreading hold.
- Mounting TVs and brackets on dot and dab walls, where standard plasterboard fixings can flex and loosen once the weight starts levering on the bracket.
- Hanging radiators and towel rails on plasterboard and insulated board, where you need a fixing that clamps behind the board instead of relying on a small thread bite.
- Securing grab rails, coat hooks, and handrails in refurbs, where the wall build-up is unknown and you need a fixing that will not just spin when you tighten it.
Choosing the Right Grip It Fixings
Sorting the right one is simple: match the fixing to the wall build-up and the real load, not what you hope the plasterboard will take.
1. Plasterboard type and thickness
If you are on standard plasterboard, choose the Gripit that's rated for that board thickness so it clamps properly behind it. If you are on insulated board or you have a big void from dot and dab, do not guess, check the build-up and pick the fixing designed for that situation.
2. Load and leverage
If it is a flat load tight to the wall like a mirror, you can size sensibly. If it is a bracketed load like a TV, radiator, or shelf that pulls out from the wall, step up to the higher rated Gripit option and use enough fixings to spread the weight.
3. Hole size and clean fitting
If you rag the hole out, any plasterboard fixing will feel weak. Drill or cut the correct hole size, keep it clean, and tighten until the fixing clamps, then stop, because over-tightening just crushes the board and wastes the grip.
Who Uses Grip It Fixings?
- Kitchen fitters and chippies, because wall units and tall cabinets need a fixing that holds firm in plasterboard when stud positions do not line up with the carcass.
- Sparks and AV installers, for TV brackets, screens, and accessories where the load is out from the wall and cheap fixings work loose over time.
- Plumbers and bathroom fitters, for towel rails, rads, and sanitary accessories on modern board walls where you still need a proper mechanical clamp.
- Maintenance teams and site snaggers, because professional grip it fixings are a quick, repeatable answer when you are making good and re-hanging kit across multiple plots.
How Grip It Fixings Work for You
Gripit fixings are made to turn a hollow plasterboard wall into something you can actually hang weight off, by clamping behind the board instead of relying on the face paper.
1. The clamp behind the plasterboard
Once fitted, the fixing opens or expands behind the board and spreads the load over a bigger area, so it is far less likely to pull through than a basic plug when you tighten up.
2. Load spread beats point load
Plasterboard fails when all the force is on one small point. Grip it fixings work by spreading that force, which is why they suit heavier items like cabinets and brackets when you cannot hit a stud.
Gripit Accessories That Make the Fix Cleaner
A clean hole and the right screw choice is what stops plasterboard fixings spinning, crushing the board, or sitting proud.
1. Correct size holesaw or cutter
Use the right size cutter for the Gripit you are fitting, because a sloppy, oversized hole is the quickest way to end up with a fixing that turns in the wall when you tighten it.
2. Suitable screws and washers for the bracket
If the bracket slot is oversized or the head does not seat properly, add a washer or use the correct head style so the load is clamped tight and you are not relying on the plasterboard face to stop movement.
3. Stud and service detector
Before you drill, scan for pipes, cables, and any timber you can actually fix into, because the best result is always landing on structure where possible and using Gripits to support the rest.
Shop Grip It Fixings at ITS
Whether you need a few grip it fixings for a one-off wall mount or you are stocking up on professional grip it fixings for ongoing fit-out work, you can pick the right types and sizes in one place. We hold the range in our own warehouse, in stock and ready for next day delivery.
Gripit Fixings FAQs
Are gripit fixings any good?
Yes, when they are used for the right wall type and you cut the correct hole size, they give a far more solid hold than basic plasterboard plugs because they clamp behind the board and spread the load. They are not magic though, so do not use them to compensate for rotten board, blown plaster, or a wall that is already moving.
How to use gripits?
Mark out properly, check for services, then cut the specified hole size cleanly. Push the Gripit in so it sits flush, then tighten until it clamps and stops moving, and do not keep cranking past that point or you will crush the board. Fit the bracket and load it sensibly, using enough fixings to share the weight.
What is the Gripit invention?
It is a plasterboard fixing design that locks in place by expanding and clamping behind the board, rather than relying on a small thread or a toggle that can twist. The point is to turn a hollow wall into a more reliable fixing point for heavier items and bracketed loads.
Will Gripit fixings work on dot and dab walls?
They can do, but you need to account for the void and the board type. If the dab gap is big, the fixing and the bracket can end up bridging space, which increases leverage, so choose the right Gripit type for the build-up and use enough fixings to spread the load.
What is the biggest mistake that makes Gripits fail?
Nine times out of ten it is a messy or oversized hole, or over-tightening until the plasterboard crushes. Cut the right size, keep the hole clean, and tighten only until the fixing clamps firmly and stops turning.
