Dewalt Trestles & Saw Horses
DeWalt saw horses give you a solid, quick set-up for cutting, fixing and supporting timber on site without wobble or bodged trestles.
When you're ripping sheets, trimming studs, or building frames, a stable platform is what keeps cuts straight and fingers safe. DeWalt saw horses and DeWalt trestles are made to take knocks, fold down for the van, and set up fast when you're bouncing between rooms. Pick the height and load rating to suit what you're actually supporting, then get your bench sorted and crack on.
What Jobs Are DeWalt Saw Horses Best At?
- Supporting long lengths of timber for chop saw and circular saw work so your cut line stays true and the offcut is controlled.
- Setting up a quick, flat work platform for fixing door linings, skirting, and studwork when there's no bench space on a busy refurb.
- Holding sheet materials up off the deck for marking out and cutting without wrecking blades on grit and screws on the floor.
- Creating a stable base for sanding, planing, and assembly work so your workpiece does not bounce about while you're leaning into it.
- Running as DeWalt trestles for snagging and second-fix tasks where you need a dependable stand that folds away at the end of the day.
Choosing the Right DeWalt Saw Horses
Sort the right DeWalt sawhorse by matching it to what you actually cut and how you work, not what looks biggest on the shelf.
1. Load rating and stability
If you are regularly supporting heavy carcassing, wet timber, or stacked sheet, do not gamble on a light stand; go for the higher load-rated DeWalt saw horses so they stay planted when you are pushing material through a saw.
2. Height and working position
If you are cutting all day, a comfortable height saves your back and keeps your control better; if you are doing lots of marking out and assembly, pick DeWalt trestles that put the work where you can lean in without hunching.
3. Folding and transport
If it is in and out of the van every day, prioritise a DeWalt saw horse that folds flat and locks properly, because anything that snags, rattles, or takes two minutes to set up will end up left behind.
4. Pairing and spacing
If you are working with longer stock or full sheets, buy as a pair and set them wide enough to stop sag, but not so wide that the middle bows; that is how you keep cuts accurate and stop material pinching the blade.
Who Uses DeWalt Saw Horses and DeWalt Trestles?
- Chippies and joiners who need a quick cutting and assembly station for first fix, second fix, and kitchen fit-outs.
- Dryliners and general builders using a DeWalt saw horse set-up to support boards and timber without balancing it on stacks of offcuts.
- Maintenance teams and site lads who want folding DeWalt trestles that live in the van and come out for anything from repairs to handover snagging.
Accessories That Make DeWalt Saw Horses Work Harder
A couple of simple add-ons turn a basic stand into a proper cutting and assembly station and save you fighting the workpiece.
1. Support rails and timber bearers
Drop rails or sacrificial timber across your DeWalt saw horses to make a wider bed for sheets and to stop you cutting straight into the top of the stand when you are trimming down boards.
2. Clamps
A decent clamp set stops timber twisting or walking while you cut, sand, or plane, which is what saves you from re-cutting a piece because it shifted right at the end of the cut.
3. Workbench tops
If you are doing more assembly than cutting, a fitted top turns DeWalt trestles into a flat bench, so you are not trying to screw, glue, or mark out on two narrow contact points.
Shop DeWalt Saw Horses at ITS
Whether you need a single DeWalt saw horse for quick support or a pair of DeWalt trestles for a proper site bench set-up, we stock the range in the sizes and styles trades actually use. It is all held in our own warehouse, in stock and ready for next day delivery, so you can order today and be set up for tomorrow's shift.
DeWalt Saw Horses and DeWalt Trestles FAQs
Do I really need a pair of DeWalt saw horses, or will one do?
For most cutting and sheet work, you want a pair. One stand is only useful as an extra support point, but two DeWalt saw horses give you a stable base that stops timber tipping and keeps the cut controlled.
Are DeWalt trestles stable enough for heavy timber and sheet materials?
Yes, if you buy to the load rating and set them up properly on level ground. The mistake is overloading light stands or spacing them too far apart, which causes sag and wobble when you start pushing material through a saw.
Will a DeWalt sawhorse damage my material or mark finished timber?
It can if you drop finished work straight onto bare metal or gritty tops. If you are handling finished timber, run a sacrificial bearer or a clean rail across the tops so you are supporting it on clean, replaceable contact points.
Can I use DeWalt saw horses as a workbench for assembly and fixing?
Yes, that is a common site set-up. For proper assembly, add a flat top or rails so you have a wider surface, then clamp your work down so it does not creep while you drill or screw.
What is the main difference between DeWalt saw horses and DeWalt trestles?
In use, it is about how you support the work. DeWalt saw horses are typically set up for cutting support and quick handling, while DeWalt trestles are often used as the base for a bench-style set-up with rails or a top for assembly and fixing.
